-
-
Products Name: Heavy Duty Horizontal Lathes
Category:Engine lathes
Item Number: 0348
Products Model: CW61140x3000
View: 24
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Max. Swing over bed Ф1400mm
Max. swing over carriage Ф1100mm
Width of bed 970mm
Max. Length of work-piece 3000mm
Max. Supporting weight between two centers 6000Kg
Spindle nose/taper in inner taper hole ISO A2-15/Metric No.140
Spindle bore Ф130mm
Range of spindle speed Normal 2.5-250r.p.m
Reverse 3.15~250r/min
No. of longitudinal and cross feeds 97 Kinds
Feed range per rev. of spindle:
Longitudinal 0.064 to 12mm
Cross (half of longitudinal feed) 0.032 to 6mm
Compound rest (a quarter of longitudinal feed) 0.016 to 3mm
Metric threads 45 Kinds; 1~120mm
Whitworth threads 42 Kinds; 30 to 1/4 t.p.i.
Module threads 46 Kinds; 0.5 to 60
Diametral pitch threads 48 Kinds; 0.5 to 60
Swing angle of tool post ±900
Max. travel of cross slide 880mm
Max. travel of compound 400mm
Speeds of rapid traverse:
Longitudinal 3470mm/min
Cross 1870mm/min
Compound rest 935mm
Power of spindle motor 22KW
Diameter of tailstock sleeve Ф160
Taper hole of tailstock sleeve Metric No.80
Max. Movement of tailstock sleeve 300mm
Power of rapid motor 1.5KW
Power of pump motor 0.55KW
Power of cooling motor 0.15KWAccessories:
Accessories supplied with machine:
Standard tool holder 4 pieces
4-jaw chuck(Ф1250) 1 set
Lighting device 1 set
Foundation block and screw 8 set
Living center 1 set
Dead center 2 pieces
Full length safeguard 1 set-
Previous: Heavy Duty Horizontal Lathes
Next: Heavy Duty Horizontal Lathes
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China