-
-
Products Name: Turning Center
Category：Turning Center
Item Number: 0287
Products Model: TN630/1500
View: 67
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
TN630/1500 turning center is a full-function machine with slant bed made of granite, linear rolling ways, large-size precision dynamic/static pressure spindle which is directly driven, precision ballscrew with internal cooling, feeding system capable of bidirectional and macro/micro feed, vibration damping/isolation techniques for overall machine and error compensation function. The machine also features high spindle speed, large power, low noise, small thermal deformation, fast feed rate, high accuracy and stability. Trouble free running hours MTBF≥900.
Specifications:
Item Unit
TN630/1500
Capacity Max swing over bed mm(in)
Φ800(31.496)
Max swing dia.over slide mm(in)
Φ600（23.622）
Max turning diameter mm(in)
Φ630(24.803)
Max turning length mm(in)
1500(60)
Spindle Hydraulic chuck diameter mm(in)
Φ250（10）
Spindle nose A2-8
Spindle thru-hole mm(in)
Φ105(4.133)
Spindle bearings(front/rear) mm(in)
Φ160/Φ140（6.299/5.512）
Spindle speed r/min(rpm)
50-5000
Main motor power (cont/30min) kW(hp)
67.4/80（91.66/108.8）
Max output torque of spindle N•m(ft-lb)
795（586.281）
Carriage Slant angle DEG
45°
X/Z-axis travel mm(in)
385/1500(15.157/60)
X/Z-axis rapid traverse m/min(ipm)
36/36(1417)
X/Z-axis servo motor torque N•m(ft-lb)
37/37(27.286)
X/Z-axis ball screw diameter mm
Φ40/Φ50(1.574/1.968)
Turret Number of stations 12
Tool section(turning/boring) mm(in)
32×32/Φ50(1.26/1.9)
C-axis Min controlled angle DEG
0.001
Motor of revolving tool kW(hp)
9.7 (13.2)
Speed of revolving tool r/min(rpm)
10000
Max end milling dia/tapping size mm(in) (in)
Φ25(0.984)/M18
Tailstock Quill dia/travel mm(in)
φ130/150(5.118/5.906〞)
Taper of center MT No.
6
Accuracy Run-out of spindle mm(in)
0.0005(0.0000196)
Periodical axial slip of spindle mm(in)
0.001(0.0000393)
X/Z-axis repeatability mm(in)
0.003/0.003(0.000118)
Others Power source kVA
100
Dimension(L×W×H) (without chip conveyer) mm(in)
5260×2607×2335
(207x102.6x91.9)
Dimension(L×W×H) (with chip conveyer) mm(in)
5967×2607×2335
(234.9x102.6x91.9)
-
Previous: Turning Center
Next: Turning Center
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China