-
-
Products Name: CNC Spiral Bevel Gear Grinder
Category：Gear Grinders
Item Number: 1587
Products Model: GGB350
View: 72
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
1. GGB350 is an 8-axis CNC Spiral Bevel Gear Grinder with 8-axis simultaneous movements. An eccentric grinding mechanism is equipped on the grinding wheel spindle for grinding the Formate ring gears highly efficiently.
2. The machine can grind spiral bevel gears of the Gleason system, not only using the Completing Cycle Method but also using the Fixed Setting Method.
3. Hypoid gears of high-deceleration ratio and coupling with face circular teeth can be machined on this machine.
4. The independent grinding oil filtration system and the efficient oil mist exhausting device are equipped on the machine.
5. The work spindle adopts the direct-drive technology with high indexing accuracy.
6. A Siemens 840DSL CNC control system is equipped on the machine.
7. Automatic tool setting and automatic stock dividing can be performed on this machine.
Specifications:
Model GGB350 Max. diameter of work 350mm Max. module of work 10mm Max. tooth depth 20mm Max. face width 60mm Teeth number 1~200 Extreme ratio 0.180555556 Working accuracy DIN5 Diameter of Grinding wheel 3.5-9 inch Speed of grinding wheel spindle 0-5000rpm Diameter of work spindle at large end Φ99.219mm Taper of bore of work spindle 01:19.7 Length of through hole of work spindle 310mm Speed of work spindle 0-130rpm Rotating angle of work table -5-90° Rotating speed of work table 0-5rpm Overall dimensions (Lx W x H) 3580x2470x2675mm Machine weight 13000kg Floor space (L x W) 5000x6000mm 
-
Previous: CNC Spiral Bevel Gear Grinder
Next: Threaded-wheel Gear Grinding Machine
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China