-
-
Products Name: Pipe End Notching Machine
Category：Pipe Notching Machine
Item Number: 1307
Products Model: C-50NC
View: 51
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
1. Manual feeding，Press foot switch to start，mould clamp，Notching，mould open，manual taking samples. It’s suitable for all kinds of material tubes, such as steel tube, Iron tube, and stainless tube and so on.
2. No need for cooling.
3. Notching angle：0-180 can be adjusted.
4. Oli pressure：70-14Okg／c㎡
5. Hydraulic arc forming machine
6. Mainly used to connect pipes after ARC forming, the machine is easy to weld stably and perfectly.
Specification:
Model C-50 Forming capacity ∮50x3t Adjusted angle 20°-90° Motor 4kw Control NC System gauge 12Mpa Pushing Force of the oil cylinder 8.5T Oil Tank capacity 150L Dimension 82×110×163cm 
-
Previous: Tube End Notching Machine
Next: Pipe Notcher
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China