Features: 

-Main spidle powered by a double speed motor. The higher speed is used for grinding cylinder/cylinder head surface, while the lower speed is used for cylinder/cylinder head surface milling (skimming).

-Wheel head with powered rapid up/down travel, and when the slide is about to reach the work piece, manual readjusting can be used.

-Worktable hydraulically powered, and it travels at stepless variable speed. 
-Guide ways lined with wear-resistence plastic turcite-B.
-Both powered and manual lubricating are applicable.
-Eletrica cabin and hydraulic unit are sepatated with machine body.

Specification:

Max powered travel of work table: 1800mm
Vetical travel of slide: 800mm
Main spindle up and down: 50mm（30）
Max grinding width: 400mm
Max griding length: 1600mm
Max milling width: 370mm (single tool)
Max milling length: 1600mm

Work table size: 1500×400mm
From wheel head to work table 0-800mm
Work table center to column: 380mm
Wheel head diameter: 400mm
Wheel head speed: 1400/700r/min
Slide traveling speed: 900mm/min
Work table feeding speed: 0-5000mm/min, stepless
Slide feeding rate against each circle of work table reciprocating: 0.01/0.02/0.03/0.04/0.05, 5 steps
Powered feeding type: single-sided or double-sided at option
Wheel head motor: (Double speed motor) 3.3/2.2kw
Slide rapid travel motor: 0.75kw Servo (auto feeding) / 0.55kw (manual operation)
Hydraulic motor: 0.75kw
Coolant pump: 0.09kw
             

Machine size: 3550/2000/2140mm
Floor space: 5350/2020/2460mm
Packing size: 3800/2210/2240mm
Net/gross weight: 2800/3400kgs