-
-
Products Name: Five-spindle Four-side Moulder
Category：Moulders
Item Number: 0942
Products Model: MB4023×5
View: 22
Tel：86-13851087033
E-mail: vulmac@163.com
Specification:
MODEL MB4023×5
Width of working piece（mm） 25-230
Thickness of working piece（mm） 8-120
Feed speed (Stepless speed changing)(m/min) 6-24
Feed plate length （mm） 1767
Speed(rpm) 6000
Diameter of tool axle (mm) Φ40
Turning diameter of tool axle (mm) Φ108-145
Max.length of installing blade (mm) 240
Axial adjusting range of tool axle (mm) 20
Motor power kw(HP) 5.5(7.5)
Speed(rpm) 6000(7500)
Diameter of tool axle (mm) Φ40
Max.turning diameter of tool (mm) Φ125-180
Max.length of installing blade (mm) 130
Axle adjusting range of tool axle (mm) 30
Motor power kw(HP) 7.5(10)
Speed(rpm) 6000
Diameter of tool axle (mm) Φ40
Turning diameter of tool for maxhining shaped form pieces (mm) Φ108-145
Turning diameter of tool for maxhining plane pieces (mm) Φ108-160
Turning diameter of the second lower horizontal tool axle (mm) Φ108-180
Max.length of installing blade(mm) 240
Axle adjusting range(mm) 30
Motor power of upper tool axle kw (HP) 7.5(10)
Motor power of lower tool axle kw(HP) 5.5(7.5)
Feeding pinch wheel (mm) Φ140
Feed motor power (kw) 3
Feeding girder lift motor power kw (HP) 0.55(0.75)
Outer diameter of chip discharge pipe (mm) Φ150
Total capacity of installed motor (kw) 29.55
Air pressures (MPa) 0.3-0.6
Overall dimensions (mm) 3545×1700×1600
Weight(kg) 2800
-
Previous: Five-spindle Four-side Moulder
Next: Last Already
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China