Full automatic face mask body machine:

This machine is mainly used for the automatic forming of face masks. The entire roll of fabric is driven by rollers after unwinding. The fabric is automatic bending, hemming, the nose strip is cut automatic and then passed through the ultrasonic sealing fabric. The mask fabric with nose strip sealing parts will be cut and formed by a cutter. The whole process is automatically controlled. Only one person is required to operate this machine. The scientific and reasonable mechanical transmission configuration makes this machine extremely efficient. The special welding wheel and cutter wheel design have good abrasion resistance and greatly increase the service life of the product.

Equipment installation and configuration requirements:

1) Equipment size: 4200mm (L) x 1100mm (W) x 2200mm (H);

2) Equipment weight: 1600 KG

3) Working voltage: AC220V, 50 / 60HZ, rated power: 4KW

4) Compressed air: 0.5-0.7Mpa

5) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness no less than 100,000)

Equipment characteristics:

(1) The machine adopts aluminum alloy structure, small size, stable operation, low scrap rate, photoelectric detection, automatic counting, which can control the production speed and high output;

(2) It can produce 100 pieces per minute, and it can produce (3-6 layers) multilayer masks.

Full-automatic ear ribbon welding machine:

An ultrasonic welding method is used to fuse the ear band (elastic band) to the outside of the mask ribbon sheet to form a complete mask device. It is the last process in the production of ear ribbon masks. The equipment uses a conveyor chain to place the mask body in the fixture one by one, and it is fully automated.

Equipment installation and configuration requirements:

1) Equipment size: 2200mm (L) x 1000mm (W) x 1900mm (H);

2) Equipment weight: 600 KG;

3) Working voltage AC220V 50 / 60HZ, rated power: 4KW;

4) Compressed air: 0.5-0.7Mpa;

5) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness no less than 100,000)

Equipment characteristics:

(1) The machine adopts aluminum alloy structure, and it is strong;

(2) Configure high-power, adjustable ultrasonic welding system;

(3) Photoelectric detection and automatic counting;

(4) PLC program control, high degree of automation;

(5) High stability, low failure rate and excellent performance;

(6) One machine can be used for multiple purposes. Adults and children can be adjusted;

(7) 40 pcs per minute.