-
-
Products Name: 2-Roll Straightening Machine
Category：2-Roll Straightening Machine
Item Number: 1609
Products Model: J2-30H
View: 65
Tel：86-13851087033
E-mail: vulmac@163.com
Machine features:
1. Main machine frames are of whole piece cast iron, with high rigidity.
2. Cantilever type control panel
3. Roll angling are adjusted with power, to ensure accuracy and save labor
4. Rollers are of most updated design, capable of better finishing quality
5. High level of automation, saving man power
Specification:
Model J2-30H Work piece Diameter capacity ( mm ) (non-drawn material) σb≤450 Mpa Φ10 - Φ38 ( L ≥2000) σb ≤1000Mpa Φ10 - Φ28 ( L ≥2000) Surface hardness ≤ HB350± 10 ( ≤HRC42±0.3) Straightness (mm/m) ≤3 Diameter Tolerance ≤IT10 (standard tolerance class) Roundness ≤50% of diameter tolerance Surface roughness (Ra) ≤3.2 - 6.4mm Finished Straightness ( mm/m ) ≤0. 1 0 Cylindricity ≤0.015 Diameter Tolerance ≤IT8 (standard tolerance class) Surface Roughness ( Ra ) ≤0.8 μm Number of straightening rolls 2 Straightening roller diameter ( mm ) Φ175 Straightening speed (infinitely variable speed) 5-25 ( m/min ) Main motor power ( kW ) 22x2 Lifting motor power ( kW ) 1.1 Dimensions ( m ) Main machine 5.5X2.0X2.4, Auxiliary 3.6X 2.4 X Length Weight (t) Main machine ≈ 4.5; Auxiliary machine ≈0.35*length Total power ( kW ) 50 Compressed air source 0.5-0.8 MPa , 3cbm /min, with secondary oil-water separator 
-
Previous: 2-Roll Straightening Machine
Next: Last Already
-
PRODUCTS
SERVICE
Tel:86-21-54700210
Mobile:86-13851087033 (Whatsapp, WeChat)
E-mail:vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Shanghai, China