Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Turning, Milling and Drilling 3-in-1 Machine
Category:3-in-1 Lathes
Item Number: 1209
Products Model: LMD420/800
View: 85
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Modle | LMD-420/800 |
Turning | |
Distance between centers | 800 mm |
Swing over bed | 420 mm |
Max.longitudinal travel | 740 mm |
Max.cross travel | 200 mm |
Spindle taper | M.T.4 |
Travel of tailatock barrel | 70mm |
Taper of tailstock barrel | M.T.3 |
Spindle hole diameter | Ø28mm |
Spindle speed | 160-1360r.p.m. (7steps) |
Longitudinal leadscrew pitch | 6T.P.I. or 4mm |
Thread can be cutted | 4-120T.P.I./0.2-6mm |
Range of automatic feeding (Longitudinal and cross) | 0.002-0.014inch/0.05-0.35mm |
Drilling and Milling | |
Spindle taper | M.T.3 |
Spindle travel | 110mm |
Max. distance between spindle center to column | 285mm |
Max. distance between nose and table | 306mm |
Spindle speed | 120-3000r.p.m. (16steps) |
Table size | 475mm×160mm |
Drilling capacity | 22mm |
End milling capacity | 28mm |
Face milling capacity | 80mm |
Miscillaneous | |
Motor power | 0.55KW |
Voltage/Frequency | As per customer's request |
Net weight | 280kg |
Gross weight | 325kg |
Overall dimension | 1760mm×580mm×965mm |
Packing size | 1130mm×580mm×1100mm |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China