Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Spiral Bevel Gear Grinder
Category:Gear Grinders
Item Number: 1587
Products Model: GGB350
View: 72
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
1. GGB350 is an 8-axis CNC Spiral Bevel Gear Grinder with 8-axis simultaneous movements. An eccentric grinding mechanism is equipped on the grinding wheel spindle for grinding the Formate ring gears highly efficiently.
2. The machine can grind spiral bevel gears of the Gleason system, not only using the Completing Cycle Method but also using the Fixed Setting Method.
3. Hypoid gears of high-deceleration ratio and coupling with face circular teeth can be machined on this machine.
4. The independent grinding oil filtration system and the efficient oil mist exhausting device are equipped on the machine.
5. The work spindle adopts the direct-drive technology with high indexing accuracy.
6. A Siemens 840DSL CNC control system is equipped on the machine.
7. Automatic tool setting and automatic stock dividing can be performed on this machine.
Specifications:
Model | GGB350 |
Max. diameter of work | 350mm |
Max. module of work | 10mm |
Max. tooth depth | 20mm |
Max. face width | 60mm |
Teeth number | 1~200 |
Extreme ratio | 0.180555556 |
Working accuracy | DIN5 |
Diameter of Grinding wheel | 3.5-9 inch |
Speed of grinding wheel spindle | 0-5000rpm |
Diameter of work spindle at large end | Φ99.219mm |
Taper of bore of work spindle | 01:19.7 |
Length of through hole of work spindle | 310mm |
Speed of work spindle | 0-130rpm |
Rotating angle of work table | -5-90° |
Rotating speed of work table | 0-5rpm |
Overall dimensions (Lx W x H) | 3580x2470x2675mm |
Machine weight | 13000kg |
Floor space (L x W) | 5000x6000mm |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China