Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Spiral Bevel Gear Grinder
Category:Gear Grinders
Item Number: 0174
Products Model: YK2080G
View: 95
Tel:86-13851087033
E-mail: vulmac@163.com
Dimensions of work to be cut | |||||||
Max. module | 15 | mm | |||||
Max. pitch cone distance
| Spiral angle
| 0° | 285 | mm | |||
15° | 350 | mm | |||||
30° | 350 | mm | |||||
Pitch angle of workpiece | Max. | 90° | |||||
Min. | 5° | ||||||
Max. gear ratio (shaft angle 90°) | 10:1 | ||||||
Max. pitch diameter |
Gear ratio |
10:1 |
Spiral angle
| 0° | 575 | mm | |
15° | 700 | mm | |||||
30° | 800 | mm | |||||
2:1 | 0° | 520 | mm | ||||
15° | 635 | mm | |||||
30° | 750 | mm | |||||
1:1 | 0° | 395 | mm | ||||
15° | 500 | mm | |||||
30° | 600 | mm | |||||
Max. face width | 100 | mm | |||||
Spiral angle | 0°~60° | ||||||
Pressure angle | 20° | ||||||
Max. tooth depth | 33 | mm | |||||
Number of teeth | 4~100 | ||||||
Diameter of Grinding wheel | 6″9″12″18″ | ||||||
workhead | |||||||
Distance from face of spindle to machine center | Max. | 600 | mm | ||||
Min. | 125 | mm | |||||
Each graduation for Vernier & scale showing the Distance | Scale | 1 | mm | ||||
Vernier | 0.02 | mm | |||||
Downward from center position | when the distance from face of spindle to machine center being at | 125~270 | 25 | mm | |||
270~330 | 70 | mm | |||||
330~540 | 90 | mm | |||||
Upword from center position | 90 | mm | |||||
Reading of each graduation for Vernier & scale showing the upward and Downward | Scale | 1 | mm | ||||
Vernier | 0.02 | mm | |||||
Taper hole of spindle | at large end | 153 | mm | ||||
Taper | 1:20 | ||||||
Length of taper | 180 | mm | |||||
Diameter of through hole | 125 | mm | |||||
Colouring diameter of spindle | 235 | mm |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China