Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Gear Shaping Machine
Category:Gear Shapers
Item Number: 1518
Products Model: Y54
View: 28
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Model | Y54 |
Maximum module | 6mm |
Maximum workpiece diameter (external teeth) | 500mm |
Maximum workpiece diameter (internal teeth) | 550mm |
Maximum workpiece pitch diameter (internal teeth) | 400mm |
Maximum tooth width | external tooth 105mm / Internal tooth 15mm |
The maximum distance from the axis of the cutter shaft to the axis of the table | 350mm |
The outer diameter of the shaft sleeve of the worktable spindle | 240mm |
The diameter of the small end of the taper hole of the worktable spindle | 40mm |
Worktable spindle hole taper | 1:10 |
The outer diameter of the flange on the worktable | 140mm |
The maximum stroke of the tool | 125mm |
The distance from the support of the gear shaper to the work surface | 35,160mm |
The maximum vertical movement of the tool holder | 510mm |
The movement amount of the tool rest shown in each grid of the indexing plate for adjusting the tooth height | 0.02mm |
The calculated diameter of the gear shaper | 100mm |
Tool reciprocating strokes per minute | 83,120,110,240 |
Circumferential feed per reciprocating stroke of the tool | 0.11, 0.21, 0.24, 0.30, 0.35, 0.64 |
The radial feed of the tool per reciprocating stroke | 0.024/0.048/0.096 |
Main motor power | 2.2kw |
Speed | 960 rpm |
Fast motor power | 0.6kw |
Speed | 1420 rpm |
Cooling pump motor power | 0.15kw |
Speed | 2700 rpm |
Machine dimensions | 1750x1300x2060mm |
Weight | 3500kg |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China