Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Cylindrical Grinding Machine
Category:Cylindrical Grinder
Item Number: 0206
Products Model: G13
View: 60
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
unit | Specifications | ||||
GW1320 | G1332 | G1332A | |||
General capacity | |||||
Distance between centers | m | 0.5, 0.75 | 1, 1.5, 2, 3 | 2, 3 | |
Centre heigh | mm | 135 | 180 | ||
Dia.Ground(O.D) | mm | 5-200 | 8-320 | ||
Max weight of work piece | kg | 100 | 150 | 500 | |
Workhead | |||||
Center taper | MT | 4 | 5 | ||
Spindle speed | r/min | 25-380 stepless | 26,52,90,130,180,260 | ||
Wheelhead | |||||
Wheel spindle speed | r/min | 1335 | 1100 | 1100 | |
Wheelhead rapid travel | mm | 50 | |||
Max travel | mm | 205 | 235 | 235 | |
Hand feed per rev. | mm | rough:2.0, fine:0.5 | |||
Hand feed per gra. | mm | rough:0.01, fine:0.0025 | |||
Max dimension of wheel(OD×W×ID) | mm | 500×50×203 | 600×63×305 | ||
Table | |||||
Hand feed per rev. | mm | 6 | 6 | 6 | |
Max swivelling angle of table | Clockwise | ° | 3° | 3°(1m,1.5m), 2°(2m, 3m) | 2°(2m, 3m) |
Widdershins | 9°(0.5m),8°(0.75m) | 7°(1m),6°(1.5m), 5°(2m), 3°(3m) | 5°(2m), 3°(3m) | ||
Longitudinal traverse speed of table | m/min | 0.1-4 | |||
Tailstock | |||||
Center taper | MT | 4 | |||
Quill travel | mm | 30 |
unit | Specifications | |||||
G1350 | G1350A/B | G1363 | GQ1380A | |||
General capacity | ||||||
Distance between centers | m | 1.5, 2, 3, 4 | 3, 4 | 2, 3, 4, 5 | 3, 4, 5 | |
Centre heigh | mm | 270 | 270 | 370 | 500 | |
Dia.Ground(O.D) | mm | 25-500 | 25-500 | 30-630 | 50-800 | |
Max weight of work piece | kg | 1000 | 2000 | 3000 | 3000 | |
Workhead | ||||||
Center taper | MT | 6 | 6 | Metric 80 | ||
Spindle speed | r/min | 18-180, stepless | 10-100, stepless | |||
Wheelhead | ||||||
Wheel spindle speed | r/min | 870 | ||||
Wheelhead rapid travel | mm | 100 | ||||
Max travel | mm | 438 | 475 | 550 | ||
Hand feed per.rev | mm | rough:4.0, fine: 0.5 | ||||
Hand feed per.gra | mm | rough:0.02, fine: 0.0025 | ||||
Max dimension of wheel(OD×W×ID) | mm | 750×75×305 | ||||
Table | ||||||
Hand feed per rev. | mm | 5 | ||||
Max swivelling angle of table | Clockwise | ° | 3°(1.5m), 2°(2m, 3m), 1°(4m) | 2°(3m), 1°(4m) | 2°(2m), 1°(3m,4m,5m) | 1°(3m,4m,5m) |
Widdershins | 6°(1.5m), 5°(2m), 3°(3m), 2°(4m) | 3°(3m), 2°(4m) | 4°(2m), 3°(3m), 2.5°(4m), 1.5°(5m) | 3°(3m), 2.5°(4m), 1°(5m) | ||
Longitudinal traverse speed of table | m/min | 0.1-3 | 0.1-2.5 | |||
Tailstock | ||||||
Center taper | MT | 6 | Metric 80 | |||
Quill travel | mm | 70 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China