Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Universal Cylindrical Grinding Machines
Category：Cylindrical Grinder
Item Number: 0207
Products Model: G14 Series
View: 25
Tel：86-13851087033
E-mail: vulmac@163.com
Specification:
| Model | G1432B×1000 | G1432B×1500 | GW1420×500 | GW1420×750 | |
| General capacity | |||||
| Distance between centers | mm | 1000 | 1500 | 500 | 750 |
| Centre heigh | mm | 180 | 180 | 135 | 135 |
| Dia.Ground(O.D) | mm | 8-320 | 8-320 | 5-200 | 5-200 |
| Dia.Ground(I.D) | mm | 30-100 | 30-100 | 25-100 | 25-100 |
| Max.length ground(O.D) | mm | 1000 | 1500 | 500 | 750 |
| Max.length ground(I.D) | mm | 125 | 125 | 100 | 100 |
| Max weight of work piece | kg | 150 | 150 | 100 | 100 |
| Workhead | |||||
| Swivelling angle | 90 | 90 | 90 | 90 | |
| Center taper | MT | 4 | 4 | 4 | 4 |
| Spindle speed | r/min | 50HZ:25-220 | 50HZ:25-220 | 25-380 | 25-380 |
| 60HZ:30-364 | 60HZ:30-364 | ||||
| Wheelhead | |||||
| Wheel spindle speed | r/min | 1670 | 1670 | 1670 | 1670 |
| Wheelhead rapid travel | mm | 50 | 50 | 50 | 50 |
| Max travel | mm | 246 | 246 | 205 | 205 |
| Swivelling angle | ° | ±30° | ±30° | +10° | +10° |
| Hand feed per.rev | mm | rough:2.0 | rough:2.0 | rough:2.0 | rough:2.0 |
| fine:0.5 | fine:0.5 | fine:0.5 | fine:0.5 | ||
| Hand feed per.gra | mm | rough:0.01 | rough:0.01 | rough:0.01 | rough:0.01 |
| fine:0.0025 | fine:0.0025 | fine:0.0025 | fine:0.0025 | ||
| Max dimension of wheel(OD×W×ID) | mm | 400×50×203 | 400×50×203 | 400×50×203 | 400×50×203 |
| Internal grinding | |||||
| Spindle speed | r/min | 10000 | 10000 | 10000 | 10000 |
| Dimension of wheel | mm | max:50×25×13 | max:50×25×13 | max:30×25×10 | max:30×25×10 |
| min:17×20×6 | min:17×20×6 | min:17×20×6 | min:17×20×6 | ||
| Table | |||||
| Handwheel Trave per rev | mm | 6 | 6 | 6 | 6 |
| Max swivelling angle of table | ° | clockwise:3° | clockwise:3° | clockwise:3° | clockwise:3° |
| widdershins:7° | widdershins:6° | widdershins:9° | widdershins:8° | ||
| Longitudinal traverse speed of table | m/min | 0.1-4 | 0.1-4 | 0.1-4 | 0.1-4 |
| Tailstock | |||||
| Center taper | MT | 4 | 4 | 4 | 4 |
| Quill travel | mm | 30 | 30 | 30 | 30 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
