Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Gear Hob Grinding Machine
Category：Tool Grinders
Item Number: 1640
Products Model: GH200N
View: 95
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
Designed for gear hob including worm gear hobbing tool
Maximum helical angle ±15°
With Siemens 808D CNC controller
Maximum hob diameter: 200mm
With oil-mist separating device
With linear guide ways
Specifications:
| Item | Value | |
| Max diameter of hob | Φ200mm | |
| Chip groove quantity of the hob | 1-99 | |
| Chip groove helical pitch | 1000mm-∞ | |
| Maximum chip groove helical angle | ±15° | |
| Maximum hob tooth height | 40mm | |
| Distance between centers | 160mm | |
| Sand wheel diameter | Φ200mm | |
| Maximum peripheral speed of sand wheel | 30m/s | |
| Grinding head maximum axial travel | 15mm | |
| Grinding head swivel angle | ±15° | |
| Work table longitudinal travel | Travel | 430mm |
| Speed, stepless | 0.05-16m/min | |
| Resolution | 0.001mm | |
| Work piece spindle taper | MT4 | |
| Tail stock center axial move | 30mm | |
| Tail stock center to work piece spindle nose | Maximum | 600mm |
| Minimum | 340mm | |
| Work piece rotating resolution | 0.001° | |
| Grinding head motor | 2.2KW, 2800r/min | |
| Hydraulic motor | 1.1KW, 1400r/min | |
| Coolant pump | 0.33KW, 0.48-2.3cbm/h | |
| Work table driving servo motor | 11nm, 3000r/min | |
| Dividing head driving servo motor | 6nm, 3000r/min | |
| Total power of machine | 12KW | |
| Machine size | 2860×1550×1860 | |
| Machine weight | 3000kg | |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
