Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Universal Cutter Grinder
Category:Tool Grinders
Item Number: 0238
Products Model: U2
View: 71
Tel:86-13851087033
E-mail: vulmac@163.com
Description:
For grinding HSS and carbide engraving cutter as well as single head or multiple head cutters in various shapes such as radius cutters or negative taper angle cutters. The universal index head can be positioned at each 15°intervals so that any particular angle can be obtained. Free 360°or 180° rotation is allowed for grinding end mills,twist drill,lathe cutters by only replacing the attachment on the index head and no complex setup is needed.
Specifications:
Specifications | U2 | |
Wheel | Diameter | φ100mm |
Thickness | 50mm/35mm | |
Hole diameter | φ20mm | |
Spindle speed | 5200rpm | |
Max.clamping diameter | φ3-16mm | |
Longitudinal traver of index head carrier | 140mm | |
Longitudinal adjustment travel of index head carrier | 18mm | |
Spindle and wheel longltudinal adjustment travel | 6mm | |
Taper angle range | 0-100° | |
Negative taper angle range | 0-20° | |
Reliefangle range | 0-25° | |
Moter | Power | 0.37kw |
Speed | 2810rpm | |
Voltage Three-Phase | 380V | |
Voltage Single-Phase | 220V | |
Frequency | 50Hz/60Hz | |
Gross weight | 52Kg | |
Packing dimensions | 55.5*45*43cm |
Standard Accessories:
Adjustable Diamond Wheel Dresser 1pc
Wheel flange (mounted on machine) 1pcs
Collect??: 4, 6, 8mm 3pc
Grinding Wheel PA100# (φ20mm hole) 1pc
Lock Pin 1pc
Working Lamp 1pc
Drive Belt? 1pc
Aligning finger 1pc
Tools 1set
Manual 1 copy
Optional Accessories:
End mill grinding attachment (φ3-16mm)
Twist drill grinding attachment (φ3-8mm)
Lathe tool grinding attachment (20x20mm)
Twist drill attachment End mill attachment Lathe cutter attachment
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China