Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Bench Lathe
Category：Bench Lathes
Item Number: 0274
Products Model: CQ9332
View: 52
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
-Spindle is supported by high quality tapered roller bearing.
-Automatic feed and threading are fully interlocked.
-Tailstock may be offset for turning tapers.
-High precision chuck.
-Adjustable gibs for slideways.
-Large, 38mm(1-1/2) spindle bore
-Gear drive power
-Gearbox gets left and right hand threads to cut.
-Removable gap/increase your swing
-Precise cuts with cross & longitudinal
Specifications:
| Length | 1310 mm | 51-3/5 |
| Width | 625 mm | 24-3/5 |
| Height | 450 mm | 17-5/7 |
| Shipping Weight | 280kg | 618lb |
| Machine Weight | 220kg | 485lb |
| Crate Size | 137×73×73cm | 54×28×28 |
Lathe Specifications | ||
| Swing over bed | 320 mm | 12-3/5 |
| Swing over carriage | 200 mm | 7-7/8 |
| Distance between centers | 600 mm | 23-3/5 |
| Lathe Chuck Diameter | 170 mm | 6-7/10 |
| Lathe Chuck Type | 3 Jaw Self Centering | |
| Spindle taper | MT5# | |
| Spindle through bore | 38 mm | 1-1/2 |
| Spindle Speeds | 12(60-1600 RPM) | |
| Metric threads | 15 (0.5-4mm) | |
| Inch threads | 23 (11-40 1/n) | |
| Longitudinal feed rates | 0.1-1.50mm/r | 0.004-0.059 in.per rev |
| Cross feed rates | 0.022-0.3mm/r | 0.0008-0.0118 in.per rev |
| Tailstock barrel Taper | MT3# | |
| Tailstock barrel travel | 80mm | 3-1/7 |
| Electrical Specifications | ||
| Horsepower | 750(1100)w | 1(1-1/2)hp |
| Motor Type | A/C | |
| Phase | Single or third phaes | |
| Voltage | 110 or 220 Volts | |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
