Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Bench Lathe
Category:Bench Lathes
Item Number: 0275
Products Model: CQ9318
View: 80
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
-Most economical , widely useful rariable lathe.
-V-way bed is hardened and precision ground.
-Easily and quickly to change speed.
-Spindle is supported by precision tapered bearing.
-Large MT3 spindle bore.
-Headstcok gets high and low speed by gears.
-Adjustable gibs for the slideway.
-Power longitudinal feed allows threading.
-High precision chuck.
-Equipped wigh emergency stop button.
-Change gears has large feed and threading functions.
-Tailstock may be offset for turning taper.
-Optional speed readout.
-Tolerance test certificate, test flow chart included.
Specifications:
Length | 785 mm | 30-9/10 " |
Width | 310 mm | 12-1/5 " |
Height | 335 mm | 13-1/5 " |
Shipping Weight | 50kg | 110lb |
Machine Weight | 40kg | 80lb |
Crate Size | 785×310×335 | 31×12-1/5×13-1/5 " |
Powerfeed (X-Axis) | Yes | |
Powerfeed (Y-Axis) | No | |
Lathe Specifications | ||
Distance between centers | 310 mm | 12 " |
Dial Calibration on Leadscrew | 0.05 mm | 0.002 " |
Headstock Taper | MT3# | |
Lathe Chuck Mount | Bolt-On | |
Spindle Bore | 20 mm | 4/5 " |
Spindle Speeds | 200-2500 RPM | |
Swing over bed | 180 mm | 7 " |
Swing over work table | 95 mm | 3-3/4 " |
Thread pitch on processing | 0.4-2 mm | 12-48 1/n |
Tailstock Taper | MT2# | |
Tailstock quill Travel | ||
Electrical Specifications | ||
Horsepower | 300W | 2/5hp |
Motor Type | A/C | |
Phase | Single | |
Voltage | 110 or 220 Volts |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China