Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Slant Bed CNC Lathe
Category:CNC lathes
Item Number: 1330
Products Model: LNC-460G
View: 71
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Specification | LNC460G | LNC400G | ||
Max.swing over bed | mm | ф480 | ф450 | |
Max.swing over cross slide | mm | ф280 | ф240 | |
Suggested turning diameter | mm | ф250 | ф260 | |
Max turning diameter | Discs | mm | ф350 | ф320 |
Axes | mm | ф250 | ф240 | |
Max. turning length | mm | 390 | 350 | |
mm | 320 | |||
Spindle nose type | A2-6 | A2-6 | ||
Spindle nose taper | ф70,1:20 | ф70,1:20 | ||
Spindle through hole | mm | ф62 | ф62 | |
Bar capacity | mm | ф50 | ф50 | |
Spindle speed (with brandname bearings) | r/min | 100-3500 stepless | 100-3500 stepless | |
Max. torque output(7.5KW) | Nm | 140 | 265 | |
Main motor power | Unlimited continuous work | kW | 7.5 | 7.5 |
30 min continuous work | 11 | 11 | ||
Standard hollow hydraulic chuck | inch | 8” | 8” | |
X axis rapid travel | m/min | 20(12) | 20 | |
Z axis rapid travel | m/min | 20(12) | 20 | |
X axis travel | mm | 260 | 210 | |
Z axis travel | mm | 500 | 450 | |
Tail stock sleeve diameter | mm | ф52 | ф52 | |
Tail stock sleeve travel | mm | 80 | 60 | |
Tail stock sleeve taper | MT4 | MT4 | ||
Guide ways type | Rolling guide way | Rolling guide way | ||
Tool post type | 8-postion horizontal | 8-postion horizontal | ||
Tool size | Outer cylindrical | mm | 25×25 | 25×25 |
Boring tool arbor | mm | Ф32 | Ф32 | |
Chip conveyor, optional | Chain type | Chain type | ||
Load capacity | Discs | kg | 50 | 60 |
Axes | kg | 100 | 100 | |
Weight | kg | 3800 | 3500 | |
Center height | mm | 965 | 965 | |
Machine size | mm | 2400×1800×2000 | 2500×1800×1600 | |
Power | Kva | 25 | 20 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China