Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Lathe
Category:CNC lathes
Item Number: 1493
Products Model: CK-630G/2000
View: 19
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Project | The main parameters | unit | CK-630G/1500 | CK-630G/2000 | CK-630G/3000 |
Turning range | Max. swing diameter over bed | mm | Ø650 | Ø650 | Ø650 |
Max. swing diameter over cross | mm | Ø500 | Ø500 | Ø500 | |
Max. tuming diameter | mm | Ø540 | Ø540 | Ø540 | |
Max. travel of Z-axis | mm | 1500 | 2000 | 2000 | |
Bar capacity (through chuck bore) | mm | Ø90 | Ø90 | Ø90 | |
Max. workpiece length | mm | 1500 | 2000 | 3000 | |
Main spindle | Spindle speed ranges | r/min | 200-1200 | 200-1200 | 200-1200 |
Type pf spindle bore | type | A2-11 | A2-11 | A2-11 | |
Taper of spindle nose | mm | Ø112 | Ø112 | Ø112 | |
Hydraulic hollow chuck | inch | 15 | 15 | 15 | |
Hydraulic Sleeve clamp | mm | / | / | / | |
Spindle motor power | kW | 22 KW servo | 22 KW servo | 22 KW servo | |
Machine bed | Machine bed slant degree | type | 30°HT250 | 30°HT250 | 30°HT250 |
X/Z Linear guide | model | 45/55 | 45/55 | 45/55 | |
Max. travel of X-axis | mm | 360 | 360 | 360 | |
Max. travel of Z-axis | mm | 1550 | 2150 | 3150 | |
Ball screw And drive | X axis lead screw | model | 4010 | 4010 | 4010 |
Z axis lead screw | model | 6310 | 6310 | 6310 | |
Lead screw bearing | NSK C | NSK C | NSK C | ||
Rapid traverse of X/Z axis | m/min | 16/12 | 16/12 | 16/12 | |
X-Servo motor torque | Nm | 15 | 15 | 15 | |
Z-Servo motor torque | Nm | 15 | 18.5 | 27 | |
Tool post | Hydraulic tool post type | type | 125-12T | 125-12T | 125-12T |
Tool shank size | mm | □ 32x32/ ◎Ø50 | □ 32x32/ ◎Ø50 | □ 32x32/ ◎Ø50 | |
Tailstock | Hydraulic tailstock | type | Automatic | Automatic | Automatic |
Tail sleeve stroke | mm | 150 | 150 | 150 | |
Tailstock sleeve taper | MT,No | MT-5 | MT-5 | MT-5 | |
Tailstock sleeve diameter | mm | Ø150 | Ø150 | Ø150 | |
Miscillaneous | Turning precision | level | IT6 | IT6 | IT6 |
X/Z axis repeat positioning accuracy | mm | x-axis:0.012 | x-axis:0.012 | x-axis:0.012 | |
mm | z-axis:0.016 | z-axis:0.02 | z-axis:0.02 | ||
roughness | um | Ra w 0.16 | Ra w 0.16 | Ra w 0.16 | |
Chip conveyor | / | / | / | ||
Coolant System | W | 250 | 250 | 250 | |
Lubricating Row Amount And | mt | 2-6ml 15min/each time | 2-6ml 15min/each time | 2-6ml 15min/each time | |
Machine dimensions(L×W×H) | m | 3.7*2.2*2.2 | 4.5*2.2*2.2 | 5.5*2.2*2.2 | |
Machine weight | Kg | 6800 | 8300 | 10400 | |
Power | kVA | 50 | 50 | 50 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China