Shanghai Vulcan Machinery Co., Ltd.

Products Name: Engine Lathe

Category：Engine lathes

Item Number: 1226

Products Model: L1340

Tel：86-13851087033

E-mail: vulmac@163.com

Features:

*Brake equipment can make spindle stopped very quickly, but motor not stop for better protection
*Supersonic frequency hardened bed ways;
*Precision roller bearing for spindle;
*High quality steel,ground and hardened gear inside headstock;
*Easy and fast operating gearbox;
*Enough strong power motor;
*D4 camlock spindle nose;
*Various threads cutting functions available

Specification:

MODEL		L1340	L1440
Swing over bed	mm	φ330	φ350
Swing over carriage	mm	φ195	φ215
Swing over gap	mm	φ476	φ500
Width of bed-way	mm	186	186
Distance between centers	mm	1000	1000
Taper of spindle		M.T.5	M.T.5
Spindle diameter	mm	φ38	φ38
Step of speed		18	18
Range of speed	rpm	Low step 60-1100	Low step 60-1100
Range of speed	rpm	High step 85-1500	High step 85-1500
Head		D1-4	D1-4
Metric thread		26kinds (0.4-7mm)	26kinds (0.4-7mm)
Inch thread		34kinds(4-56 T.P.I)	34kinds(4-56 T.P.I)
Moulder thread		16 kinds(0.35-5M.P)	16 kinds(0.35-5M.P)
Diametral thread		36 kinds(6-104D.P)	36 kinds(6-104D.P)
Longitudinal feeds	mm/r	0.052-1.392 (0.002”-0.0548”)	0.052-1.392 (0.002”-0.0548”)
Cross feeds	mm/r	0.014-0.38 (0.00055”-0.015”)	0.014-0.38 (0.00055”-0.015”)
Diameter lead screw	mm	φ22 (7/8”)	φ22 (7/8”)
Pitch of lead screw		3mm or 8 T.P.I	3mm or 8 T.P.I
Saddle travel	mm	1000	1000
Cross travel	mm	170	170
Compound travel	mm	74	74
Barrel travel	mm	95	95
Barrel diameter	mm	φ32	φ32
Taper of center	mm	M.T.3	M.T.3
Motor power	Kw	1.5(2HP)	1.5(2HP)
Motor for coolant system’s power	Kw	0.04(0.055HP)	0.04(0.055HP)
Machine(L×W×H)	mm	1920×760×760	1920×760×760
Stand (left) (L×W×H)	mm	440×410×700	440×410×700
Stand (right)(L×W×H)	mm	370×410×700	370×410×700
Machine	Kg	500/560	505/565
Stand	Kg	70/75	70/75
Loading amount		22pcs/20’container	22pcs/20’container