Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Engine Lathe
Category:Engine lathes
Item Number: 1455
Products Model: L6276C/3000
View: 19
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Model | L6266B/2000 | L6276C/3000 | |
Swing over bed | mm | 660 | 760 |
Swing over cross slide | mm | 430 | 530 |
Distance between centers | mm | 2000 | 3000 |
Swing in gap | mm | 870 | 970 |
Width of gap | mm | 240 | 240 |
Width of bed | mm | 390 | 390 |
Spindle nose | D8 | D8 | |
Spindle bore | mm | 82 | 105 |
Spindle taper | MT6 | 1:20 | |
Spindle speed | rpm | 9-1600, 24 steps | 6-1120, 24 steps |
Max torque spindle main spindle yields | NM | 1500 | 1500 |
Range of longitudinal feed | mm/rev | 0.028-6.43 | 0.063-6.43 |
Range of cross feed | mm/rev | 0.012-2.73 | 0.027-2.73 |
Lead screw pitch | 12mm or 2 tpi | 12mm or 2 tpi | |
Metric threads | mm | 0.5-224, 48 steps | 1-224, 46 steps |
Inch threads | tpi | 72-0.125, 46 steps | 28-0.125, 42 steps |
Module threads | mm | 0.5-112,42 steps | 0.5-112,42 steps |
Diametral pitch threads | 56-0.25DP,45 steps | 56-0.25DP,45 steps | |
Cross slide travel | mm | 360 | 360 |
Top slide travel | mm | 200 | 200 |
Tool shank size | mm | 25x25 | 25x25 |
Longitudinal rapid travel | m/min | 4.5 | 4.5 |
Transverse rapid travel | m/min | 1.9 | 1.9 |
Taper of tailstock sleeve | MT5 | MT5 | |
Max travel of tailstock sleeve | mm | 150 | 150 |
Tail stock sleeve diameter | mm | 75 | 75 |
Main motor | kw | 11 | 11 |
Rapid travel motor | 250w/1360rpm | 250w/1360rpm | |
Cooling pump | w | 90,25L/min | 90,25L/min |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China