Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Engine Lathe
Category：Engine lathes
Item Number: 0323
Products Model: LW6263
View: 48
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
Guide way surfaces and headstock gears are supersonic frequency hardened.
The spindle system is high in rigitidy and accuracy.
Rapid feed structure is available on apron.
Clutch in headstock makes the lathe start smoothly and brake quickly.
Gear grooves are available on bed to prevent tailstock from retreating.
Specifications:
| ITEMS | LW6163A/LW6263A | LW6180A/LW6280A |
| Max. swing over bed | Ø630 mm | Ø800 mm |
| Max. swing over carriage | Ø350 mm | Ø520 mm |
| * Max. swing over gap | Ø830 mm | Ø1000 mm |
| Width of bed | 560 mm | |
| *Effective length of gap | 310 mm | |
| Max. length of work piece(two centers) | 1000/1500/2000/3000/4000 mm | |
| Max. turning length | 650/1150/1650/2650/3650 mm | |
| Max. Weight of work piece(between centers) | 2000kg | |
| Spindle nose | D11 | |
| Spindle bore | Ø105 mm | |
| Taper hole diameter and taper of spindle hole | Metric Ø120, 1：20 | |
| Number of speeds | 18 | |
| Spindle speed scope | 7.5-1000 r/min | |
| Pitch of longitudinal ball screw/diameter | 12 mm/ Ø55 | |
| Number of longitudinal feeds | 64 | |
| Range of longitudinal feeds（1：1） | 0.1-1.52 r/min | |
| Range of longitudinal feeds（16：1） | 1.6-24.3 r/min | |
| Number of cross feeds | 64 | |
| Range of cross feeds | half of longitudinal feeds | |
| Rapid traverse for longitudinal | 4000 mm/min | |
| Rapid traverse for cross | 2000 mm/min | |
| Metric threads range and number | 1-240 mm/50 | |
| Inch threads range and number | 14-1 TPI/26 | |
| Module threads range and number | 0.5-120 mm/53 | |
| D.P. threads range and number | 28-1 DP/24 | |
| Size of tool shank | 32×32 mm | |
| Max. travel of cross slide | 440 mm | |
| Swing angle of tool post | ±90° | |
| Max. travel of top slide | 200 mm | |
| Tailstock taper of bore | M.T.NO.6 | |
| Tailstock sleeve travel | 230 mm | |
| Tailstock sleeve dia. | Ø100 mm | |
| Power of main motor | 11KW | |
| Rapid feed motor power | 1.1KW | |
| Power of cooling pump | 90W | |
| 3m Overall dimensions(L×W×H) | 3275/3725/4225/5225/6275×1393×1537mm | |
| Net weight(3m) | 3400/3700/4200/4700/5800㎏ | 3600/3900/4400/4900/6000㎏ |
| Note : The items with “*” are only for 62 series. | ||
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
