Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Engine Lathe
Category：Engine lathes
Item Number: 0325
Products Model: LA6266
View: 94
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
With clutched headstock
105mm spindle bore
Specification:
| Item | LA6250C | LA6266C | LA6280C | ||
| Swing over bed | mm | 500(20”) | 660(26”) | 800(31 1/2”) | |
| Swing over carriage | mm | 300(11 13/16”) | 400(15 3/4”) | 540(21 1/4”) | |
| Swing over gap | mm | 720(28”) | 880(34 5/8”) | 1020(40 1/8”) | |
| Effective length of gap | mm | 210(8 1/4”) | 210(8 1/4”) | 210(8 1/4”) | |
| Max.. workpiece length | mm | 750, 1000, 2000, 2200, 3000 | |||
| Max. turning length | mm | 650, 900, 1400, 1900, 2100, 2900 | |||
| Height of centers over flatways | mm | 205(9 13/16”) | 330(13”) | 380(15”) | |
| Taper of hole in spindle | No | φ113, 1:20 | |||
| Kinds of spindle speed | Forward | Kinds | 24 | ||
| Reverse | Kinds | 12 | |||
| Range of spindle speeds | Forward | r/min | 14-1400 | ||
| Reverse | r/min | 18-1400 | |||
| Spindle bore | mm | 105 (4 15/16”) | |||
Feeds each turn of main spindle | |||||
| Number of longitudinal and cross feeds | Kinds | 64 | |||
| Longitudinal | Normal | mm/rev | 0.08-1.59 | ||
| Fine | mm/rev | 0.042-0.078 | |||
| Rough | mm/rev | 1.71-6.33 | |||
| Cross | Normal | mm/rev | 0.04-0.79 | ||
| Fine | mm/rev | 0.021-0.039 | |||
| Rough | mm/rev | 0.86-3.16 | |||
| Rapid Longitudinal feed rate of carriage | m/min | 4 | |||
| Rapid traverse feed rate of cross slide | m/min | 2 | |||
| Threads | |||||
| Metric pitches | Number | Kinds | 44 | ||
| Range | Mm | 1-192 | |||
| Withworth pitches | Number | Kinds | 21 | ||
| Range | t.p.i | 2-24 | |||
| Module pitches | Number | Kinds | 39 | ||
| Range | Mm | 0.25-48 | |||
| Diameteral pitches: | Number | Kinds | 37 | ||
| Range | t.p.i | 1-96 | |||
| Max travel of cross slide | Mm | 320 | 370 | 390 | |
| Max .travel of compound rest | Mm | 140(5 1/2”) | |||
| Max. swivel of compound rest | ±90° | ||||
| Size of tool shank | Mm | 75 （2 15/16”） | |||
| Tailstock spindle diameter | Mm | 25*25 （2 15/16”） | |||
| Tailstock spindle travel | Mm | 150 (5 7/8”) | |||
| Taper of tailstock spindle center hole | MORSE NO.5 | ||||
| Pitch of leadscrew | Mm | 12（4t.p.i） | |||
| Main drive motor | Type | Y132M-4 | |||
| Power | KW | 7.5(10H.P) | |||
| Speed | r/min | 1750 | |||
| Coolant pump | Type | AOB-25 | |||
| Motor power | W | 90(3/25H.P) | |||
| Capacity | Lit/min | 25 | |||
| Rapid traverse motor | Type | YSS2-5634 | |||
| Power | W | 250(1/3) | |||
| Speed | r/min | 1630 | |||
| Number of main drive V-belt | 4 | ||||
| V-belt for lubrication pump | 0-1000 | ||||
| Number of V-belt for lubrication | 1 | ||||
| Weight | |||||
| Length capacity | 750 | Kg | 2060 | 2260 | 2400 |
| 1000 | Kg | 2140 | 2450 | 2560 | |
| 1500 | Kg | 2290 | 2640 | 2800 | |
| 2000 | Kg | 2640 | 2880 | 3087 | |
| 2200 | Kg | 2790 | 3180 | 3287 | |
| 3000 | Kg | 3500 | 3687 | 3887 | |
| Overall dimensions (L*W*H) | |||||
| Length capacity | 750 | mm | 2400*1037*1312 | 2400*1106*1392 | 2400*1120*1462 |
| 1000 | mm | 2650*1037*1312 | 2650*1106*1392 | 2650*1120*1462 | |
| 1500 | mm | 3150*1037*1312 | 3150*1106*1392 | 3150*1120*1462 | |
| 2000 | mm | 3650*1037*1312 | 3650*1106*1392 | 3650*1120*1462 | |
| 2200 | mm | 4025*1037*1312 | 4025*1106*1392 | 4025*1120*1462 | |
| 3000 | mm | 4775*1037*1312 | 4775*1106*1392 | 4775*1120*1462 | |
LA6150C, 1.5m
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
