Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Heavy Duty Engine Lathe
Category:Engine lathes
Item Number: 0327
Products Model: LW62125B/3000
View: 61
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Model | LW62125B/3000 | |
Max. Swing over bed | mm | 1250 |
Max.work piece length | mm | 3000 |
Max. Swing over tool post | mm | 920 |
Max.swing in gap | mm | 1450 |
Gap width | mm | 310 |
Spindle bore / spindle nose | mm | 105/D11 |
Spindel bore taper | mm | Metric 120 |
Steps of main spidle speed | 18 | |
Main spindle speed range | r/min | 5.4-720 |
Bed ways width | mm | 600 (Whole piece type) |
Loading capacity | kg | 3000 |
Tool post feed steps/main spindle per round | 64 | |
Longtudinal | mm | 0.05-24.3 |
Transverse | mm | 0.025-12.15 |
Metric thread pitch | 50kinds 1-240 | |
Inch thread range | 26kinds 14-1/4t.p.i | |
Module thread range | mm | 53 kinds 0.5-120 |
Diametral pitch threads range | 24kinds 1-28DP | |
Max. travel of cross slide | mm | 500 |
Max. travel of compound rest | mm | 200 |
Speeds of rapid traverse (Longitudinal) | mm/min | 4000 |
Max.tailstock sleeve travel | mm | 250 |
Tailstock sleeve taper | mm | MT6 |
Main Motor | kw | 11 |
at seaport
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China