Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Engine Lathe
Category:Engine lathes
Item Number: 0333
Products Model: L6236Dx1000
View: 87
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
-Precision ground and supersonic frequency hardened bed ways
-The spindle is supported with precision roller bearing
-Headstock gears made of high quality steel,ground and hardened
-Removable gap block to enlarger diameter capacity
-Gear box enable wide range of feeds and threads
Specification:
Model | L6236DX1000 |
Swing over bed | Φ360mm |
Swing over cross slide | Φ224mm |
Swing in gap | 502mm |
Height of center | 180mm |
Distance between centers | 1000mm |
Width of bed | 187mm |
Total travel of cross slide | 170mm |
Total travel of top slide | 95mm |
Spindle bore | Φ52mm |
Spindle nose | MT5 |
Spindle morse taper in nose | MT5 |
Spindle speeds number | 8 |
Spindle speeds range | 70-2000 R.P.M |
Cutting tool section | 16x16mm |
Leadscrew thread | 8 T.P.I or pitch 3mm |
Threads imperial pithches | 34 sizes, 4-56 T.P.I |
Threads metric pithches | 26 steps, 0.4-7mm |
Longitudinal feeds(imperial/metric) per rev | 0.002-0.0548/0.052mm-0.392mm, 32 steps |
Cross feeds(imperial/metric) per rev | 0.007-0.0187/0.014mm-0.380mm, 32 steps |
Total travel of tailstock quill | 100mm |
Tails stock quill | Φ52mm(2 1/64) |
Taper tailstock quill | M.T.#4 |
Spindle drive motor | 1.5kw |
Coolant pump motor | 40W |
Machine dimension | 1930mm×760mm×1530mm |
N.W | 540KG |
G.W | 645KG |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China