Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Horizontal Engine Lathe
Category：Engine lathes
Item Number: 0340
Products Model: LW Series
View: 72
Tel：86-13851087033
E-mail: vulmac@163.com
Specification:
| Model | LW6263B | LW6280B | LW6294B |
| Max.swing diameter over bed mm | 630 | 800 | 940 |
| Max.swing diameter over carriage mm | 350 | 520 | 660 |
| Max.workpiece length mm | 750,1000,1500, 2000, 3000-10000mm | ||
| Max.swing diameter in gap mm | 830 | 1000 | 1140 |
| Gap width mm | 300 | ||
| Spindle bore and nose | 100mm; C11 | ||
| Taper in spindle nose and center | 120mm; 1:20 | ||
| Steps and range of spindle speeds r/min | 18 Kinds,7.5-1000 | 18 Kinds,6-800 | 18 Kinds,6-800 |
| Steps and range of longitudinal feeds mm/r | 64 Kinds 0.1-24.32 | ||
| Longitudinal and cross feed rate | 1:02 | ||
| Rapid speed of carriage mm/min | 4000 | ||
| Pitch of leadscrew | 12mm; 1/2 | ||
| Number, range of Metric thread mm | 50 Kinds1-240 | ||
| Number, range of Whitworth thread t.p.i | 26 Kinds 14-1 | ||
| Number, range of Module thread mm | 53 Kinds 0.5-120 | ||
| Number, range of Diametral thread DP | 24 Kinds 28-1 | ||
| Max.cross travel of lower slidc mm | 440 | 540 | 570 |
| Max.travel of top slide mm | 200 | ||
| Max.travel of quill of tailstock | 250 | ||
| Taper of quill of tailstock | Morse No.5 | ||
| Main motor power kw | 11 | ||
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
