Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Heavy Duty Engine Lathe
Category:Engine lathes
Item Number: 0344
Products Model: CW Series
View: 80
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Model | CW6180B/C CW6280B/C | CW61100Q CW62100Q | CW61125Q CW62125Q | ||
Max.swing diameter over bed mm | 800 | 1000 | 1250 | ||
Max.swing diameter over carriage mm | 480 | 680 | 930 | ||
Max.workpiece length mm | 1500, 2000, 3000-12000mm | ||||
Max.swing diameter and width in gap mm | 1000/310 | 1200/310 | 1450/310 | ||
Spindle bore and nose | 105mm; D11 | ||||
Taper in spindle nose and center | 120mm; Mores No.5 | ||||
Steps and range of spindle speeds r/min | 18Kinds 5.4-720 | ||||
Steps and range of longitudinal feeds mm/r | 64Kinds 0.06-24.3 | ||||
Range 1:1 mm/r | 0.1-1.52 | ||||
Range 16:1 mm/r | 1.6-24.3 | ||||
Range of fine feed with change gears mm/r | 0.06-0.912 | ||||
Longitudinal and cross feed rate | 1-2 | ||||
Rapid speed of carriage mm/min | 4000 | ||||
Pitch of leadscrew | 12mm; 1/2 | ||||
Number, range of Metric thread mm | 50Kinds1-240 | ||||
Number, range of Whitworth thread t.p.i | 26Kinds 14-1 | ||||
Number, range of Module thread mm | 53Kinds 0.5-120 | ||||
Number, range of Diametral thread DP | 24Kinds 28-1 | ||||
Max.cross travel of lower slidc mm | 500 | ||||
Max.travel of top slide mm | 200 | ||||
Max.travel of quill of tailstock | 250 | ||||
Taper of quill of tailstock | Morse No.5 | ||||
Width and hardness mm | 600 | ||||
Main motor power kw | 11 or 15 | ||||
Rapid motor power kw | 1.1 | ||||
Power of coolant pump motor w | 90 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China