Main specification:

Max. Swing over bed                                   1250 mm
Max. Swing over carriage                                900 mm
Width of bed                                           755 mm
Max. Length of work-piece                              4000 mm
Max. Supporting weight between two centers                 6000 Kg
Spindle nose/taper in inner taper hole          ISO A2-15/Metric No.140
Dia. of Spindle bore                                     130 mm
Range of spindle speed                            3.15 to 315 r.p.m
No. of longitudinal and cross feeds                        97 Kinds
Feed range per rev. of spindle:
    Longitudinal                                   0.064 to 12 mm
    Cross (half of longitudinal feed)               0.032 to 6 mm
    Compound rest (a quarter of longitudinal feed)   0.016 to 3 mm
Metric threads                                     45 Kinds; 1 to 120 mm
Whitworth threads                                42 Kinds; 30 to 1 / 4 t.p.i.
Module threads                                   46 Kinds; 0.5 to 60
Diametral pitch threads                          48 Kinds; 0.5 to 60
Max. travel of cross slide                                 520 mm
Max. travel of compound                                 300 mm
Speeds of rapid traverse:
    Longitudinal                                  3470 mm/min
    Cross                                          1870 mm/min
    Compound rest                                  935 mm
Power of spindle motor                                   22 KW
Dia. of tailstock sleeve                                   160 mm
Taper hole of tailstock sleeve                          Metric No.80
Max. Movement of tailstock sleeve                         300 mm

Accessories:
Accessories supplied with machine:
4-jaw chuck (1000mm), 1 set; Lighting device, 1 set; Foundation blocks and screws; Living center, 1 set; Dead center, 2 pieces; Center sleeve, 1piece; Special tools.