Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Pipe Threading Lathe
Category：Pipe Thread Lathes
Item Number: 1538
Products Model: CK6150
View: 55
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
- Using general purpose type 3-jaw chucks, which can hold pipes of very small diamter
- Machine can do any general purpose turning job if needed.
Specification:
| Model | CK6150/1000 | ||
| Capacity | Max swing over bed | mm | Φ500 |
| Max swing over cross slide | mm | Φ270 | |
| Max turning diameter | mm | Φ500 (short dics) | |
| Max turning length (cylinder surface) | mm | 750 | |
| Machine bed width | mm | 400 | |
| Main Spindle | Spindle nose | Short cylinder | |
| Main spindle through bore | mm | Φ105 | |
| Main spindle bearing | 30228 | ||
| Main spindle speed | r/min | 80-1000 | |
| Main spindle speed steps | 3 steps | ||
| Front chuck size | mm | Φ325 | |
| Main motor | kW | 7.5 | |
| Tail stock | Tail stock sleeve | mm | Φ75 |
| Sleeve travel | mm | 150 | |
| Sleeve taper | MT5 | ||
| Axes | Feeding motors(X/Z) | Nm | 6/10 |
| Rapid travel speed (X/Z) | m/min | 4/6 | |
| Axes travel（X/Z） | mm | 270/750 | |
| Minimum feeding unit | mm | 0.001 | |
| Turret | Turret type | Vertical 4-position | |
| Turret size | mm | 200x200 | |
| Tool number | 4 | ||
| Tool shank size | mm | 25×25 | |
| Lubrication | Lubrication type | Automatic | |
| Lubrication pump volume | L | 2 | |
| Cooling | Cooling pump lift | m | 3.3 |
| Cooling pump flow ragte | L/min | 22 | |
| Precision | Cylinder surface fine turning | IT7 | |
| Fine turning roughness Ra | μm | 1.6 | |
| Roundness of cylinder surface | mm | ≤0.005 | |
| Cylindricity | mm | 0.03/300 | |
| Flatness | mm /mm | 0.025/φ300 | |
| Repeatibility(X/Z) | mm | X:0.009/Z:0.011 | |
| Positioning accuracy(X/Z) | mm | X:0.032/Z:0.04 | |
| Weight and size | Machine weight | kg | 2700 |
| Machine size（L×W×H） | mm | 2950×1650×1700mm | |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
