Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Pipe Threading Lathe, spindle bore 630mm
Category：Pipe Thread Lathes
Item Number: 0355
Products Model: PTNC630
View: 52
Tel：86-13851087033
E-mail: vulmac@163.com
Features:
Vertical electrical 4-position tool post
Main spidle driven by frequency invertor
Powered lubricating system
With electronic handwheel to facilitate tool setting
Specifications:
| Maximum swing over bed | 1400mm |
| Maximum length of work piece | 1500, 3000mm and over |
| Maximum swing over cross slide | 800mm |
| Bed width | 1100mm |
| Pipe diameter capacity | 330-630mm |
| Through hole of main spidle | 640mm |
| Main spidle speed | 1-170 rpm, 3 steps |
| Main motor | 37kw |
| X axis travel | 850mm |
| Z axis travel | 1250,2750mm |
| X axis quick travel | 4m/min |
| Z axis quick travel | 4m/min |
| Feeding rate | 1-200mm/min |
| Tail stock sleeve diameter | dia 220mm |
| Tail stock sleeve travel | 300mm |
| CNC controller | Fanuc Oi TF |
| X axis servo motor | Βis 22\2000, 20N•m |
| Z axis servo motor | Βis 40\2000 36N•m |
| Chuck dia | 1250mm |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
