Shanghai Vulcan Machinery Co., Ltd.

Products Name: Horizontal Machining Center

Item Number: 0380

Products Model: H Series

Tel：86-13851087033

E-mail: vulmac@163.com

Specifications:

ITEM		UNIT	H50	H63	H80	H100
Worktable	Table size	mm	500×500	630×630	800×800	1000×1000
	Screw hole		M16	M16	M16	M16
	Max.table load.	kg	800	1200	2000	3000
Travel	X axis travel/Tool change travel	mm	800	900/100	1250	1700
Travel	Y axis travel/Z axis travel	mm	700/800	800/900	1100/1250	1400/1400
Spindle position	Distance between table surface and spindle center	mm	100-800	100-900	100-1200	100-1500
Spindle position	Distance between table center and spindle nose	mm	150-950	180-1080	200-1450	180-1580
Spindle	Taper hole of spindle	mm	BBT50	BBT50	BBT50	BBT50
	Power	kw	22/30	26	22/30	26
	Speed range	rpm	50-12000	50-12000	50-10000	50-10000
Feed rate	Rapid feed rate	m/min	60	60	60	45
Feed rate	Cutting rate	m/min	1-30	1-30	1-30	1-10
Tool magazine	Tool magazine capacity		40	40	60	60
	Tool selection mode		Adjacent selection
	Tool shank specification		MAS BBT50
	Pull stud specification		MAS403 P50T-1
	Max.tool length	mm	400	400	600	600
	Max.tool diameter(adjacent pots full/empty)	mm	130/250	130/250	130/250	130/250
	Max.tool weight	kg	20	20	20	20
	Tool change time(T-T)	s	3.45	3.45	3.45	3.45
Pallets	Pallet change time	s	20	20	20	20
Pallets	Number of pallets		2	2	2	2
Accuracy	Positioning accuracy X/Y/Z axis	mm	0.01	0.008	0.01	0.01
	Repeat positioning accuracy X/Y/Z axis	mm	0.006	0.004	0.006	0.006
	Positioning accuracy B axis	s	8	8	8	8
	Repeat positioning accuracy B axis	s	5	5	5	5
Distance from ground to table surface		mm	1200	1300	1400	1500
Machine weight		T	15	22	28	32