Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Vertical Machining Centers
Category:Vertical Machining Center
Item Number: 0387
Products Model: PV800
View: 10
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Work table | 500×1200 mm |
X Travel | 800 mm |
Y Travel | 510 mm |
Z Travel | 680 mm |
Spindle taper | BT40 |
Distance between spindle end face and work table surface | 115-975 mm |
Distance between spindle center line and pillar guideway surface | 575 mm |
Spindle motor power | 7.5/11KW sequence /30min (option 11/15KW) |
Spindle speed range | 40-6000rpm (option 10000rpm) |
Spindle speeding mode | Stepless、AC servo |
Cutting speed(X,Y,Z) | 5-15000 mm/min |
Rapid travel(X and Y Coordinate) | 20m/min |
Rapid travel( Z Coordinate) | 15m/min |
Maximum table load | 800 Kg |
Magazine capacity | 20 Nos. (option 24 cam) |
Tool selection mode | Shortest path |
Maximum tool diameter | Φ80 mm |
Maximum tool weight | 6Kg |
Maximum tool length | 250 mm |
Tool change time | About 5.5sec. (T-T) |
Machine shield | Fully |
Positioning accuracy(ISO230-2) | 0.010 mm |
Repeatability(ISO230-2) | 0.005 mm |
Feed servo motor torque | X、Y: 11Nm Z:20Nm |
Coolant pump flux | 66L/min |
Overall electrical capacity | 20 KVA |
Weight | 6000 Kg |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China