Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Vertical Machining Center
Category:Vertical Machining Center
Item Number: 0393
Products Model: VF1370
View: 60
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Models | VF1370 |
Travel | |
X-axis(mm) | 1300 |
Y-axis(mm) | 700 |
Z-axis(mm) | 610 |
The distance between Spindle to worktable (mm) | 150-760 |
worktable | |
dimension(length * width) (mm) | 1400×650 |
T-slot (mm) | 18×5×100 |
maximum load (kg) | 1000 |
Spindle system | |
Spindle rotating speed (rpm) | 60-6000 |
Spindle taper hole | BT50 |
feed system | |
X, Y, Z-axis rate of rapid displacement (m/min) | 20/20/20 |
feed speed (mm/min) | 1-10000 |
track form | Square Slides |
Automatic Tool Change System | |
Tool storage capacity | 16-20/24 |
Tool storage type | manipulator /Cloak-style |
Maximum diameter of cutter (mm) | Φ80(Φ150) |
Maximum length of cutter (mm) | 350 |
tool changing time(knife to knife) (s) | 8 |
tool changing time(point to point) | 3.5 |
Accuracy | |
Full accuracy (mm) | ±0.01 |
Repeat accuracy (mm) | ±0.005 |
The use of pressure (kg/cm) | 5-7 |
Machine Weight (kg) | 7700 |
Numerical Control System (Mitsubishi) | E60/E68/M64 |
Drive motor (Mitsubishi) (kw) | 3.5/3.5/3.5 |
Servo spindle (Mitsubishi) (kw) | 11/15 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China