Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Gantry Type Shaping, Milling and Grinding Machine
Category:Planers
Item Number: 1633
Products Model: SMG2016X8M
View: 16
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
-Machine is designed with PLC controlling system
-Work table driven by frequency-inverter-driven AC motor
-Working head travel along the beam is powered by servo motors; beam vertical travel driven by servo motors.
-Vertical shaping head feeds along the beam, while side shaping head feed along Z axis. Shaping accuracy is up to 0.02/1000mm
-Milling head feeding along machine beam is driven by servo motor. With special tools, the milling head can do boring, drilling and countersink drilling. Milling accuracy is up to 0.02/1000mm
-Grinding head working accuracy is up to 0.015/1000mm, and roughness up to Ra0.8.
Specification:
Working capacity | Maximum cutting length | 8000mm |
Maximum cutting width | 1600mm | |
Maximum cutting height | 1250mm | |
Maximum work piece weight | 20t | |
Power | Power source | 380V / 50Hz |
Main motor | 75kw FV | |
Transmission | Worm wheel/gear rack, servo control | |
Work table | Traveling speed | 0.05-35 m/min, stepless |
Length | 8000mm | |
Width | 1400mm | |
Beam | Beam vertical traveling speed | 500mm/min |
Guide way distancing | 600mm | |
Locking | Mechanical locking | |
Column | Guide way distancing | 450mm |
Vertical turret feeding depth | Horizontal | 0.15-20mm(AC servo) |
Vertical | 0.15-15mm(AC servo) | |
Vertical turret feeding speed | Horizontal | 35-800mm/min(AC servo) |
Vertical | 600mm/min | |
Side turret | Vertical feeding | 0.15-20mm(AC servo) |
Vertical traveling speed | 35-800mm/min(AC servo) | |
Accuracies | Work table travel straightness | 0.02/1000 |
Work table flatness | 0.02/1000 | |
Parallelism of vertical turret horizontal travel against work table surface | 0.02/1000 | |
Perpendicularity of side turret vertical travel against work table surface | 0.02/300 |
Milling/boring Head and Specification
Main spindle motor | 7.5kw |
Main spindle taper | NT50 |
Main spindle nose size | 128.57mm |
Main spindle speed | 100-685r/min |
Maximum diameter of disc mill | 200mm |
Slide travel | 300mm |
Minimum feed | 0.01mm |
Max torque output | 680Nm |
Handwheel | 2mm/rev, 0.01mm/grad |
Shaping Tool Turret, electromagnetic type
Grinding head
Motor | 2.2KW |
Main spindel speed | 2800r/min |
Grinding head swivel | 60 ° |
Slide travel | 150mm |
Controll Panel
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China