Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Pipe End Notching Machine
Category:Pipe Notching Machine
Item Number: 1307
Products Model: C-50NC
View: 51
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
1. Manual feeding,Press foot switch to start,mould clamp,Notching,mould open,manual taking samples. It’s suitable for all kinds of material tubes, such as steel tube, Iron tube, and stainless tube and so on.
2. No need for cooling.
3. Notching angle:0-180 can be adjusted.
4. Oli pressure:70-14Okg/c㎡
5. Hydraulic arc forming machine
6. Mainly used to connect pipes after ARC forming, the machine is easy to weld stably and perfectly.
Specification:
Model | C-50 |
Forming capacity | ∮50x3t |
Adjusted angle | 20°-90° |
Motor | 4kw |
Control | NC |
System gauge | 12Mpa |
Pushing Force of the oil cylinder | 8.5T |
Oil Tank capacity | 150L |
Dimension | 82×110×163cm |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China