Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Open Back Press with Fixed Table and Adjustable Stroke
Category:Open Back Stationary Press
Item Number: 0632
Products Model: JE21 Series
View: 70
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
JE21 series model open back press with fixed table and adjustable stroke
■ Crankshaft mounted in transverse direction
■ Friction clutch
■ Adopts horizontally placed crankshaft.
■ Stroke adjustment device mounted on crankshaft
■ Combined dry type pneumatic friction clutch and brake.
■ Manual shut height adjustment with scale display.
■ JE21-100D and above adopts lifting balance device
■ Safety duplex valves.
■ Control by PLC of international brandname.
Specification:
SB=Steel Board Structure
CI=Cast Iron Structure
Model | JE21-16D | JE21-25D | JE21-40D | JE21-63D | ||
Nominal force | KN | 160 | 250 | 400 | 630 | |
Stoke under nominal force | Mm | 2 | 2.5 | 4 | 4 | |
Slide block stroke | Mm | 0-70 | 0-80 | 20-120 | 20-120 | |
Number of stroke | min | 130 | 100 | 70 | 60 | |
Max die set height | Mm | 170 | 180 | 220 | 290 | |
Die set height adjustment | Mm | 30 | 70 | 80 | 80 | |
Distance from slide block centre to the frame | Mm | 170 | 210 | 250 | 300 | |
Worktable dimensions(F-B*L-R) | Mm | 320*480 | 400*600 | 480*710 | 570*760 | |
Dimensions of worktable hole | Mm | φ100 | φ120 | φ220*25*180 | φ200*45*φ180 | |
Thickness of bolster | Mm | 60 | 70 | 80 | 90 | |
Hole dimensions in bed(diamdter*F-B*L-R) | Mm | 160*160 | 180*180 | 220*220 | SB: 220*250; CI: 280*220*320 | |
Dimensions of slide block bottom surface(F-B*L-R) | Mm | 180*200 | 210*250 | 270*320 | 280*320 | |
Size of the handle hole(diameter×depht) | Mm | φ40*60 | φ40*70 | φ50*70 | φ50*80 | |
Distance between columns of body | Mm | 250 | 330 | 410 | SB 470; CI 320 | |
Motor | Type | Y2-132S-8 | Y2-100L2-4 | Y2-132M1-6 | Y2-132M2-6 | |
Power | Kw | 2.2 | 3 | 4 | 5.5 | |
Outline dimension(F-B*L-H*H) | Mm | 1050*1175*1830 | 1560*1300*2210 | 1620*1450*2350 | 1700*1550*2640 | |
Net/Gross weight | Kg | 1600 | 2100 / 2400 | 3500 / 3800 | SB: 4550 / 5050 | |
CI: 5050/ 5550 |
Model | JE21-80D | JE21-100D | JE21-125D | ||
Nominal force | KN | 800 | 1000 | 1250 | |
Stoke under nominal force | Mm | 5 | 6 | 6 | |
Slide block stroke | Mm | 10-130 | 16-140 | 16-140 | |
Number of stroke | min | 53 | 40 | 40 | |
Max die set height | Mm | 330 | 320 | 320 | |
Die set height adjustment | Mm | 100 | 100 | 100 | |
Distance from slide block centre to the frame | Mm | 300 | 380 | 380 | |
Worktable dimensions(F-B*L-R) | Mm | 580*860 | 710*1100 | 720*1200 | |
Dimensions of worktable hole | Mm | φ260*50*φ220 | φ260*50*φ220 | φ260*50*φ220 | |
Thickness of bolster | Mm | 100 | 120 | 120 | |
Hole dimensions in bed(diamdter*F-B*L-R)) | Mm | SB:220*260 ; CI: 280*220*380 | 260*290 | 260*290 | |
Dimensions of slide block bottom surface(F-B*L-R) | Mm | 280*380 | 420*560 | 420*560 | |
Size of the handle hole(diameter×depht) | Mm | φ60*75 | φ60*80 | φ60*80 | |
Distance between columns of body | Mm | SB: 450 ; CI: 410 | 630 | 620 | |
Motor | Type | Y2-160M-6 | Y2-160M-6 | Y2-160L-6 | |
Power | Kw | 7.5 | 7.5 | 11 | |
Outline dimension(F-B*L-R*H) | Mm | 1720*1630*2720 | 2200*1850*3050 | 2200*1850*3050 | |
Net/Gross weight | Kg | SB: 5520/6120 ; CI: 6460/7060 | 9000/10500 | 11000/12500 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China