Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Toggle Type Powder Press
Category:Powder Compaction Press
Item Number: 0643
Products Model: PP-250T
View: 70
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
.Toggle structure, strong power
.Automatic filing, pressing and ejection
.Mechanical forced floating die compacting, haul-down ejection, non-simultaneous three-step pressing, i.e. pre-loading, pressing and top pressing
.Pressing stroke and top pressing stroke are infinitely variable with display scales
.Fixed ejection position,there is no need to adjust ejection stroke
.Pneumatic protective ejection function and the force is infinitely variable
.Inching, adjust, single cycle, cont. operation are available
.Presses with frequency inverter have the function of phase missing protection,over current and over moment protection etc.
.Holding pressure can be set in pressing position and the pressure holding time can be set randomly
.Centralized timing ,quantiative lubrication of kinematical pair,under voltage and oil filter jam alarming function
.Stopping/running functions are controlled by pneumatic clutch
.Double air control valve for controlling the clutch for the safety running/stopping of press
.All operation programs are controlled by encoder-PLC---touch screen for its displaying, controlling, setting and adjusting
.Under pressure alarming functions for air circuit control system
.Electrical pressure controller displays the peak value of compacting pressure, setting high/low pressure alarming signals
.Overfill / underfill function
Speicfication:
Model | PP-200T | PP-250T | PP-400T | PP-600T | |
Maximum pressing force | 200 | 250 | 400 | 600 | kn |
The maximum ejection force | 200 | 250 | 400 | 600 | kn |
Maximum powder loading height | 100 | 100 | 120 | 120 | mm |
Overfill / underfill allowance | 5 | 5 | 5 | 5 | mm |
Upper punch/die sychronized travel | 100 | 100 | 100 | 120 | mm |
Female die down travel driving force | 100 | 100 | 112 | 115 | kn |
Female die supporting capacity | 120 | 120 | 225 | 300 | kn |
Female die down travel | 100 | 100 | 120 | 120 | mm |
Upper slide travel | 150 | 150 | 175 | 180 | mm |
Upper punch readjustment | 60 | 60 | 70 | 70 | mm |
Lower punch readjustment | 60 | 60 | 70 | 70 | mm |
Upper punch pre-load stroke | 75 | 75 | 85 | 90 | mm |
Max dia of work piece | 75 | 75 | 85 | 100 | mm |
Stroke number per minute | 8-24 | 8-24 | 5-20 | 5-20 | spm |
Motor Power | 3.7 | 3.7 | 7.5 | 15 | KW |
Compressed air pressure required | 0.55-0.7 | 0.55-0.7 | 0.55-0.7 | 0.55-0.7 | Mpa |
Compressed air consumption | 852 | 852 | 900 | 1200 | L/min |
Machine weight | 3600 | 3600 | 5500 | 8900 | kg |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China