Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Corner Forming Machine
Category:Corner Forming Machine
Item Number: 0675
Products Model: Q-30
View: 29
Tel:86-13851087033
E-mail: vulmac@163.com
Service Fields:
-This machine is used in the processing of sheet metal corner moulding such as cold-rolled plate, aluminum plate, stainless steel plate, copper plate etc.
-Widely used in the switching door, cover plate, aluminum single panel curtain wall, switchboard ,container cover, household appliances, instruments and other fields
Technical Features:
-The machine has double shearing units. One is a automatic shearing unit, which trims the work piece automaticly after the corner is formed by rolls and dies. This shearing unit is designed for large quantity of pieces of same design. In case of small quantity designs, the machine prepares you a manual shearing unit which saves your time for programming.
-Install safety light curtain protection to make the production process more safe and humanistic.
-Adopt the imported first-class brand components as our key electrical components to ensure the reliability and stability of the system.
-The PLC controller with 68 points can store and save lots of sheet metal corner moulding technologies, gap compensation coefficients .At the same time, it can save and rewrite the coefficients of special materials and even the complex bimetal at any time
-This machine improves shearing efficiency more than six times by changing the tedious process of open-angle welding ,grinding etc into rolling forming directly. It saves labor, electricity, gas, grinding material and other accessories for enterprises, therefore, it is both environmentally friendly and greatly reduces the production cost.
Specification:
Technical parameters | Content | |||
Model | Q-30 | |||
Processing Range (mm) | Material | Thickness | Flange height (mm) | Outer Radius of Corner (mm) |
Cold-rolled plate | 0.6 | <=10 | 1.5-50, and bigger than sheet thickness | |
0.8-1.2 | <=20 | |||
1.5 | <=25 | |||
2.0-3.0 | <=30 | |||
Stainless steel plate | 0.5 | <=8 | ||
1 | <=18 | |||
1.5 | <=23 | |||
2-2.5 | <=28 | |||
Aluminum plate | 1 | <=20 | ||
1.5 -2.0 | <=25 | |||
2.5-3.0 | <=30 | |||
Working time for one corner | About 9 sec. | |||
Working tiem for four corners | About 60 sec. | |||
Dies used | Rolling die, square die, shear dies | |||
AC servo motor | Fuji/Japan | |||
Pneumatic system | Airtac/Taiwan | |||
PLC | Fatek/Taiwan (fatek.com/en) | |||
Low voltage electrical appliance | Schneider/France | |||
Hydraulic value | ATOS (atos.com/en-ch/) or DUPLAMATiC | |||
Main motor power(KW) | 4 | |||
Dimensions(LengthX WidthX Height)(mm) | 1700*1370*1970 | |||
Weight(KGS) | 1650 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China