Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: CNC Corner Forming Machine
Category:Corner Forming Machine
Item Number: 0676
Products Model: B-30
View: 61
Tel:86-13851087033
E-mail: vulmac@163.com
Service Fields:
-This machine is used in the processing of sheet metal corner moulding such as cold-rolled plate, aluminum plate, stainless steel plate, copper plate etc.
-Widely used in the switching door, cover plate, aluminum single panel curtain wall, switchboard, container cover, household appliances, instruments and other fields
Technical Features:
-The forming and shearing is finished separately in two working position;
-Install safety light curtain protection to make the production process more safe and humanistic;
-The accuracy of different thickness is controlled by Fuji servo motors;
-Parameters is adjusted through touch screen, some other movement is controlled by Fatek PLC. A set of mould is with the machine, including: rolling mould, square mould, shear dies of a corner radius.
-Adopt the imported first-class brand components as our key electrical components to ensure the reliability and stability of the system.
-The PLC controller with 68 points can store and save lots of sheet metal corner moulding technologies, gap compensation coefficients. At the same time, it can save and rewrite the coefficients of special materials and even the complex bimetal at any time
-This machine improves efficiency more than three times by changing the tedious process of open-angle welding, grinding etc into rolling forming directly. It saves labor, electricity, gas, grinding material and other accessories for enterprises, therefore, it is both environmentally friendly and greatly reduces the production cost.
Specification:
Technical parameters | Content | |||
Model | B-30 | |||
Processing Range (mm) | Material | Thickness | Flange height (mm) | Outer Radius of Corner (mm) |
Cold-rolled plate | 0.6 | <=10 | 1.5-50,and bigger than sheet thickness | |
0.8-1.2 | <=20 | |||
1.5 | <=25 | |||
2.0-3.0 | <=30 | |||
Stainless steel plate | 0.5 | <=8 | ||
1 | <=18 | |||
1.5 | <=23 | |||
2-2.5 | <=28 | |||
Aluminum plate | 1 | <=20 | ||
1.5 -2.0 | <=25 | |||
2.5-3.0 | <=30 | |||
Working time for one corner | About 9 sec. | |||
Working tiem for four corners | About 60 sec. | |||
Dies used | Rolling die,square die ,shear knife | |||
AC servo motor | Fuji/Japan | |||
Pneumatic system | Airtac/Taiwan | |||
PLC | Fatek/Taiwan (fatek.com) | |||
Low voltage electrical appliance | Schneider/France | |||
Hydraulic value | Huade (huade-hyd.com/En.aspx)/China | |||
Main motor power(KW) | 4 | |||
Dimensions(LengthX WidthX Height)(mm) | 1720*1330*1770 | |||
Weight(KGS) | 1260 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China