Product Feature And Usage:

The Z Shaped Purline Forming Machine by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, exhibition center, cinema, theatre, garden and so on.

Main technical parameter: 　

Main motor power: 25 kw 

Roll stand : about 16 groups

Thickness of coils : 1.5-3.0 mm

Cutter material: Cr12                                                                     

Control system: PLC

Description: 　

This kind of machine including the following equipments: Decoiler /uncoiler, Guide equipment, Roll forming system, Punching system, Hydraulic cutting system, Run out table. This kind of machine is full-automatically controlled by PLC, the whole hydraulic transmission ,drive hydraulic oil pump carry out and shear through center pump station towards the hole, hydraulic pressure Motor transmit power as main transmission, characteristic its reliable for to operate steadily by hydraulic pressure. S hear towards hole precision high, high output, low energy consumption, Section geometry form rule of the notch.

Z Purlin Forming Machine can produce many type of Z-shaped purlin.The whole line mainly consist of uncoiler and its base,coil sheet flattening equipment,punching equipment,pre-cutting equipment or post cutting equipment,z-shape forming systen,hydraulic station and controlling system

Specification:

Usage:shape purlin	Model	Section size
		h(mm)	b1(mm)	b2(mm)	t(mm)
	Z100	100	50	54	2.0-2.5
	Z100	100	50	54	2.0-3.0
	Z120	120	50	54	2.0-3.0
	Z120	120	50	54	2.0-3.0
	Z140	140	50	54	2.0-3.0
	Z150	150	60	64	2.0-3.0
	Z150	150	60	64	2.0-3.0
	Z160	160	60	64	2.0-3.0
	Z160	160	60	64	2.0-3.0
	Z180	180	70	74	2.0-3.0
	Z180	180	70	74	2.0-3.0
	Z200	200	70	74	2.0-3.0
	Z200	200	70	74	2.0-3.0
	Z220	220	80	84	2.0-3.0
	Z220	220	80	84	2.0-3.0
	Z240	240	80	84	2.0-3.0
	Z240	240	80	84	2.0-3.0