Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Vertical Plastic Injection Machines
Category:Plastic Injection Machines
Item Number: 0934
Products Model: VI-200
View: 13
Tel:86-13851087033
E-mail: vulmac@163.com
Specification:
Model | Units | VI-200 | |
Screw Diameter | mm | Ф28 | Ф32 |
Injection Pressure | Kg/cm2 | 1446 | 1107 |
Theoretical Shot volume | cm3 | 65 | 84 |
Max. Shot Weight | g/Oz | 58/2.0 | 75/2.6 |
Injection Rate | cm3/sec | 40.3 | 52.7 |
Temperature Control | ZONE | 3 | |
Material Hopper Capacity | L | 15 | |
Clamping Force | T | 25 | |
Opening Force | T | 6.6 | |
Mold dimensions | mm | 360×230 | |
Min Mold Height | mm | 100 | |
Opening Stroke | mm | 180 | |
Max. Open Daylight | mm | 280 | |
Ejector Force | T | 1.3 | |
Ejector stoke | mm | 40 | |
Max. Hydraulic Pressure | Kg/cm2 | 140 | |
Pump Output | L | 130 | |
Pump Motor Power | Kw | 4 | |
Barrel Heating Power | Kw | 2.7 | |
Total Wattage | Kw | 6.7 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China