Tel: 86-21-54700210
Mobile: 86-13851087033
Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Five-spindle Four-side Moulder
Category：Moulders
Item Number: 0943
Products Model: MB4016
View: 84
Tel：86-13851087033
E-mail: vulmac@163.com
Specification:
| MODEL | MB4016×5S | MB4016×5X |
| Width of working piece（mm） | 20-160 | 20-160 |
| Thickness of working piece（mm） | 8-100(Tool dia≦Φ120mm) | 8-100(Tool dia≦Φ120mm) |
| Feed speed (Stepless speed changing)(m/min) | 5-20 | 5-20 |
| Feed plate length （mm） | 1270 | 1270 |
| Speed(rpm) | 6000 | 6000 |
| Diameter of tool axle (mm) | Φ40 | Φ40 |
| Turning diameter of tool axle (mm) | Φ120-140 | Φ120-140 |
| Max.length of installing blade (mm) | 170 | 170 |
| Axial adjusting range of tool axle (mm) | 20 | 20 |
| Motor power kw(HP) | 3 | 3 |
| Speed(rpm) | 6000 | 6000 |
| Diameter of tool axle (mm) | Φ40 | Φ40 |
| Max.turning diameter of tool (mm) | Φ120-160 | Φ120-160 |
| Max.length of installing blade (mm) | 110 | 110 |
| Axle adjusting range of tool axle (mm) | 25 | 25 |
| Motor power kw(HP) | 3×2 | 3×2 |
| Speed(rpm) | 6000 | 6000 |
| Diameter of tool axle (mm) | Φ40 | Φ40 |
| Turning diameter of tool for maxhining shaped form pieces (mm) | Φ120-160 | Φ150 |
| Turning diameter of tool for maxhining plane pieces (mm) | Φ120-160 | |
| Turning diameter of the second lower horizontal tool axle (mm) | Φ110-160 | Φ110-160 |
| Max.length of installing blade(mm) | 170 | 170 |
| Axle adjusting range(mm) | 20 | 20 |
| Motor power of upper tool axle kw (HP) | 4 | 4 |
| Motor power of lower tool axle kw(HP) | 3 | |
| Feeding pinch wheel (mm) | Φ140 | Φ140 |
| Feed motor power (kw) | 1.5 | 1.5 |
| Feeding girder lift motor power kw (HP) | 0.75 | 0.75 |
| Outer diameter of chip discharge pipe (mm) | Φ120 | Φ120 |
| Total capacity of installed motor (kw) | 19.25 | 18.25 |
| Air pressures (MPa) | 0.3-0.6 | 0.3-0.6 |
| Overall dimensions (mm) | 3420×12400×1410 | 2910×1240×1410 |
| Weight(kg) | 2500 | 2200 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China
