Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: MILLING HEAD
Category:Working Heads
Item Number: 1109
Products Model: 1TX
View: 45
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
1TX series milling head can be used to work on steel, cast iron or nonferrous work pieces for surface or groove milling. The machine features large motor power, high rigidity, high precision, low noise and smooth performance. It is capable of both rough milling and precision milling when equipped with normal milling tool or precision milling tool respectively.
Gears of 1TX are ground with Reishauer grinding machines.
Specification:
Model | 1TX20A | 1TX25 | 1TX32 | 1TX40 | 1TX50 | ||||
Driving device | 1NGb(c)20 | 1NGb(c)25 | 1NGb(c)32 | 1NG32 | 1NGb(c)40 | 1NG40 | 1NGb(c)50 | 1NG50 | |
SIZE (mm) | B (mm) | 200 | 250 | 320 | 400 | 400 | 500 | 500 | |
B1(mm) | 170 | 220 | 280 | 355 | 355 | 450 | 450 | ||
L (mm) | 320 | 100 | 500 | 630 | 630 | 800 | 800 | ||
L1(mm) | 125 | 125 | 160 | 160 | 160 | 200 | 200 | ||
L2(mm) | 132 | 150 | 160 | 220 | 245 | 275 | 320 | ||
L3(mm) | 70 | 70 | 80 | 135 | 25 | 140 | 25 | ||
H (mm) | 100 | 125 | 160 | 200 | 200 | 250 | 250 | ||
H1(mm) | 255 | 275 | 325 | 390.7 | 125 | 468 | 168 | ||
H2(mm) | 471 | 510 | 610 | 745 | 850 | 918 | 945 | ||
H3(mm) | 225 | 265 | 325 | 405 | 405 | 495 | 495 | ||
d (mm) | Ф13.5 | Ф14 | Ф14 | Ф18 | Ф18 | Ф18 | Ф18 | ||
A*C(mm) | 100*2 | 100*3 | 135*3 | 175*3 | 175*3 | 175*4 | 175*4 | ||
Main shaft speed (rpm) | 100-500 200-1000 | 80-400 125-630 | 80-400 125-630 | 500-1600 | 63-320 100-500 | 500-1250 | 50-250 80-400 | 320-1000 | |
Motor power (kw) | 1.1,1.5 | 2.2,3 | 3.4,5.5 | 7.5,11 | 15,18.5,22 | ||||
Motor turning speed (rpm) | 1400 | 1420 | 960 | 970 | 970 | ||||
Dia. of tool Disc (mm) | 80-200 | 100-250 | 125-315 | 160-400 | 200-500 | ||||
Main shaft nose type | NO.40 | NO.40 | NO.50 | NO.50 | NO.60 | ||||
Main shaft nose diameter (mm) | 88.882 | 88.882 | 128.57 | 128.57 | 221.44 | ||||
Main shaft sleeve diameter (mm) | 150 | 160 | 190 | 220 | 250 | ||||
Main shaft sleeve travel (mm) | 63 | 63 | 80 | 80 | 100 | ||||
Main shaft center height (mm) | 100 | 125 | 160 | 200 | 250 | ||||
Main shaft diameter at the point of front supporting bearing (mm) | 75 | 80 | 90 | 110 | 140 | ||||
Net weight kgs | 157 | 305 | 570 | 1160,1225,980 | 2510,2300,1860 | ||||
Machine size (L*W*H) (mm) | Motor on left | 656*235*471 | 768*298*525 | 917.5*425*635 | 1150*480*745 | 1420*563*918 | |||
Motor on right | 915*235*471 | 1029*298*525 | 1297.5*425*635 | 1168*480*745 | 2028*563*918 | ||||
Belt driven | 917.5*425*670 | 1055*480*805 | 1325*563*945 |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China