Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: Turning Center
Category:Turning Center
Item Number: 0287
Products Model: TN630/1500
View: 67
Tel:86-13851087033
E-mail: vulmac@163.com
Features:
TN630/1500 turning center is a full-function machine with slant bed made of granite, linear rolling ways, large-size precision dynamic/static pressure spindle which is directly driven, precision ballscrew with internal cooling, feeding system capable of bidirectional and macro/micro feed, vibration damping/isolation techniques for overall machine and error compensation function. The machine also features high spindle speed, large power, low noise, small thermal deformation, fast feed rate, high accuracy and stability. Trouble free running hours MTBF≥900.
Specifications:
Item | Unit | TN630/1500 | |
Capacity | Max swing over bed | mm(in) | Φ800(31.496) |
Max swing dia.over slide | mm(in) | Φ600(23.622) | |
Max turning diameter | mm(in) | Φ630(24.803) | |
Max turning length | mm(in) | 1500(60) | |
Spindle | Hydraulic chuck diameter | mm(in) | Φ250(10) |
Spindle nose | A2-8 | ||
Spindle thru-hole | mm(in) | Φ105(4.133) | |
Spindle bearings(front/rear) | mm(in) | Φ160/Φ140(6.299/5.512) | |
Spindle speed | r/min(rpm) | 50-5000 | |
Main motor power (cont/30min) | kW(hp) | 67.4/80(91.66/108.8) | |
Max output torque of spindle | N•m(ft-lb) | 795(586.281) | |
Carriage | Slant angle | DEG | 45° |
X/Z-axis travel | mm(in) | 385/1500(15.157/60) | |
X/Z-axis rapid traverse | m/min(ipm) | 36/36(1417) | |
X/Z-axis servo motor torque | N•m(ft-lb) | 37/37(27.286) | |
X/Z-axis ball screw diameter | mm | Φ40/Φ50(1.574/1.968) | |
Turret | Number of stations | 12 | |
Tool section(turning/boring) | mm(in) | 32×32/Φ50(1.26/1.9) | |
C-axis | Min controlled angle | DEG | 0.001 |
Motor of revolving tool | kW(hp) | 9.7 (13.2) | |
Speed of revolving tool | r/min(rpm) | 10000 | |
Max end milling dia/tapping size | mm(in) (in) | Φ25(0.984)/M18 | |
Tailstock | Quill dia/travel | mm(in) | φ130/150(5.118/5.906〞) |
Taper of center | MT No. | 6 | |
Accuracy | Run-out of spindle | mm(in) | 0.0005(0.0000196) |
Periodical axial slip of spindle | mm(in) | 0.001(0.0000393) | |
X/Z-axis repeatability | mm(in) | 0.003/0.003(0.000118) | |
Others | Power source | kVA | 100 |
Dimension(L×W×H) (without chip conveyer) | mm(in) | 5260×2607×2335 | |
(207x102.6x91.9) | |||
Dimension(L×W×H) (with chip conveyer) | mm(in) | 5967×2607×2335 | |
(234.9x102.6x91.9) |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China