Tel: 86-21-54700210
Mobile: 86-13851087033
Products Name: 2-Roll Straightening Machine
Category:2-Roll Straightening Machine
Item Number: 1609
Products Model: J2-30H
View: 65
Tel:86-13851087033
E-mail: vulmac@163.com
Machine features:
1. Main machine frames are of whole piece cast iron, with high rigidity.
2. Cantilever type control panel
3. Roll angling are adjusted with power, to ensure accuracy and save labor
4. Rollers are of most updated design, capable of better finishing quality
5. High level of automation, saving man power
Specification:
Model | J2-30H | ||
Work piece | Diameter capacity ( mm ) (non-drawn material) | σb≤450 Mpa | Φ10 - Φ38 ( L ≥2000) |
σb ≤1000Mpa | Φ10 - Φ28 ( L ≥2000) | ||
Surface hardness | ≤ HB350± 10 ( ≤HRC42±0.3) | ||
Straightness (mm/m) | ≤3 | ||
Diameter Tolerance | ≤IT10 (standard tolerance class) | ||
Roundness | ≤50% of diameter tolerance | ||
Surface roughness (Ra) | ≤3.2 - 6.4mm | ||
Finished | Straightness ( mm/m ) | ≤0. 1 0 | |
Cylindricity | ≤0.015 | ||
Diameter Tolerance | ≤IT8 (standard tolerance class) | ||
Surface Roughness ( Ra ) | ≤0.8 μm | ||
Number of straightening rolls | 2 | ||
Straightening roller diameter ( mm ) | Φ175 | ||
Straightening speed (infinitely variable speed) | 5-25 ( m/min ) | ||
Main motor power ( kW ) | 22x2 | ||
Lifting motor power ( kW ) | 1.1 | ||
Dimensions ( m ) | Main machine 5.5X2.0X2.4, Auxiliary 3.6X 2.4 X Length | ||
Weight (t) | Main machine ≈ 4.5; Auxiliary machine ≈0.35*length | ||
Total power ( kW ) | 50 | ||
Compressed air source | 0.5-0.8 MPa , 3cbm /min, with secondary oil-water separator |
Copyright @ vulmac.com
Tel: 86-21-54700210 Mobile: 86-13851087033 (Whatsapp, WeChat)
E-mail: vulmac@163.com
Add: Room 118, Building 20, No. 1-42, Lane 83, Hongxiang Road North, Lin'gang Special Area of China (Shanghai) Pilot Free Trade Zone, Shanghai, China